Step 2: Protect Against Electrostatic Discharge; Step 3: Unpack The Switch; Unpack Model Gs110Tup - NETGEAR GS110TUP Hardware Installation Manual

10-Port Gigabit Ethernet Ultra60 PoE++ Smart Managed Pro Desktop and Rackmount Switches
Step 2: Protect against electrostatic
discharge
WARNING: Static electricity can harm delicate components inside your switch. To
prevent static damage, discharge static electricity from your body before you touch any
of the electronic components. You can do so by periodically touching an unpainted
metal surface on the switch.
You can also take the following steps to prevent damage from electrostatic discharge
(ESD):
• When unpacking a static-sensitive component from its shipping carton, leave it in
the antistatic package until you are ready to install it. Just before unwrapping the
antistatic package, discharge static electricity from your body.
• Before moving a sensitive component, place it in an antistatic container or package.
• Handle all sensitive components in a static-safe area. If possible, use antistatic floor
pads, workbench pads, and an antistatic grounding strap.

Step 3: Unpack the switch

Check the contents of the box to make sure that all items are present before installing
the switch.

Unpack model GS110TUP

Figure 8. Model GS110TUP package contents
Installation 29 Hardware Installation Guide