Advertisement
Steps
DETAILED STEPS
Step 1
Attach the ESD-preventive wrist strap to your wrist and connect its leash to one of the ESD connection sockets on the
front (PLIM) side of the chassis or a bare metal surface on the chassis.
Step 2
Align the DC terminal block cover with the cover latch tab.
Step 3
Use the screwdriver to secure the screw into the mounting standoff.
Figure 34: Securing the Terminal Block Cover
1
DC terminal block.
Installing and Removing Power Components
62
Installing and Removing Power Components
5
Opening to align over mounting pins
Advertisement
