Cisco CRS-16 DC Installing And Removing page 55

Installing and Removing Power Components
Figure 30: Grounding Brackets
1 Chassis ground cable
2 Two M6 hex bolts attaching ground lug to chassis
3 Shelf grounding bracket (Step 3)
4 Two M6 hex bolts attaching grounding L-bracket to
chassis (Step 5)
Note A 45-degree grounding lug is shown in previous figure. A 180-degree (straight) grounding lug can also be used.
Step 5 Attach the grounding L-bracket to the chassis using the two M6 hex bolts provided. Using the torque wrench, tighten the
M6 hex bolts to a torque of 20 in.-lb (2.26 N-m).
5 Two M6 hex nuts attaching grounding L-bracket to shelf
grounding bracket (Step 4)
6 Grounding L-bracket ( Step 5)
7 Four M6 hex bolts attaching shelf grounding bracket to
power shelves (Step 3)
Installing and Removing Power Components
Steps
55