Advertisement
Installing and Removing Power Components
Figure 25: Shelf Handles Hooked Around Pins
1
Ejector handles section that fits around mounting pins
2
Mounting pins that are permanently installed in the chassis and cannot be moved or removed
Step 6
Using the wrench, tighten the two bolts that attach the rear of the power shelf to the rear of the chassis.
Step 7
Using the screwdriver, turn the captive screws at the top of the left and right handles.
Step 8
Use the screwdriver to screw the shelf to the left and right mounting blocks through the handle holes. There are four
holes, two on each handle.
Figure 26: Securing the Power Shelf Ejector Handle
Installing and Removing Power Components
Steps
49
Advertisement
