Advertisement
Steps
Figure 28: Unscrewing Power Shelf Ejector Handle
1
Top mounting screw in handle.
2
Holes for the screw that attaches the power shelf to the mounting block though the handle.
Step 3
Using the screwdriver, unscrew captive screw on the left and right handles (see previous figure).
The handles will fall down and slightly away from the shelf.
Note
Figure 29: Mounting Handle Fallen Away from the Shelf
1
Initial position, with handle in place against power shelf
2
Handle pulled down for removal of power shelf
Step 4
Grasping both handles simultaneously, pull both the left and right handles down at the same time to pull the shelf partially
out of the chassis.
Installing and Removing Power Components
52
Installing and Removing Power Components
Advertisement
