Advertisement
Installing and Removing Power Components
Figure 17: LCC Front (PLIM) Side Slot Numbers
Prerequisites
Before performing this task, you must install and wire the power shelves, and install the power modules (AC
rectifiers or DC PEMS), and alarm modules. See
AC Rectifier or DC
Required Tools and Equipment
You need the following tools to perform this task:
• ESD-preventive wrist strap
• Multimeter
• 1/4-in. x 6-in. long slotted screwdriver
Steps
To power on the chassis, perform the following steps:
PEM, and
Installing a Fixed Configuration Alarm
Installing a Fixed Configuration Power
Module.
Installing and Removing Power Components
Prerequisites
Shelf,
Installing an
35
Advertisement
