INVT Goodrive100-PV Series Operation Manual page 50

Goodrive100-PV Series Solar Pumping VFD
Function
code
Wake-up delay in
P15.15
full water state
P15.16 Empty-water delay
Wake-up delay in
P15.17
empty-water state
Hydraulic probe
P15.18
Operation time of
P15.19
Current detection
P15.20 value of underload
Name Detailed illustration of parameters
0–10000s
Time setting of wake-up delay in
full-water state (This function code is
still valid when the digital indicates the
full-water signal.)
0–10000s
Time setting of empty-water delay (This
function code is still valid when the
digital indicates the empty-water signal.)
0–10000s
Time setting of wake-up delay in
empty-water state (This function code is
still valid when the digital indicates the
empty-water signal.)
0.0–100.0%
0.0%: Invalid. If it is not 0.0%, when the
damage
signal is longer than P15.18, it will
report tSF fault directly and stop.
0.0–1000.0s
This parameter is used to set the
operation
water pump
underload.
underload
underload
prealarm (A-LL) will be reported if the
operation time is reached.
0.0%: Automatic underload detection
0.1–100.0%
operation
If it is 0.0%, it is determined by the
time of water
Under the
operation,
48
Function parameters
Default Modify
20s
5s
20s
0.0%
pump
60.0s
continuous
underload
00.00%
○
○
○
◎
○
○