Do you have a question about the IKEA IEL730C and is the answer not in the manual?
Questions and answers
Akemi Kuroda
March 6, 2025
HOW TO REPLACE WIRING FOR THE OVEN CONTROL PANEL BOARD
1 comments:
Mr. Anderson
March 6, 2025
To replace the wiring for the Whirlpool oven control panel board (IKEA IEL730C), follow these steps:
1. Disconnect Power – Turn off the oven and unplug it to avoid electrical shock. 2. Remove the Control Panel – Follow the “Removing the Control Panel” section in the manual. 3. Access the Wiring – From the back of the control panel, locate the control board and its electrical connections. 4. Disconnect Wires – Carefully remove the wiring connections from the control board. Take a picture or note the wiring positions for reference. 5. Install the New Control Board – Position the replacement board correctly and reconnect the wires according to the original configuration. 6. Reassemble the Control Panel – Secure the control panel back in place. 7. Restore Power – Plug the oven back in and test the control panel to ensure proper operation.
Always replace all parts and panels before operating. Failure to do so can result in electrical shock or injury.
Need help?
Do you have a question about the IKEA IEL730C and is the answer not in the manual?
Questions and answers
HOW TO REPLACE WIRING FOR THE OVEN CONTROL PANEL BOARD
To replace the wiring for the Whirlpool oven control panel board (IKEA IEL730C), follow these steps:
1. Disconnect Power – Turn off the oven and unplug it to avoid electrical shock.
2. Remove the Control Panel – Follow the “Removing the Control Panel” section in the manual.
3. Access the Wiring – From the back of the control panel, locate the control board and its electrical connections.
4. Disconnect Wires – Carefully remove the wiring connections from the control board. Take a picture or note the wiring positions for reference.
5. Install the New Control Board – Position the replacement board correctly and reconnect the wires according to the original configuration.
6. Reassemble the Control Panel – Secure the control panel back in place.
7. Restore Power – Plug the oven back in and test the control panel to ensure proper operation.
Always replace all parts and panels before operating. Failure to do so can result in electrical shock or injury.
This answer is automatically generated