Removing A Cooktop Burner; Removing The Igniter Switches; Removing A Spark Igniter - Whirlpool IKEA IEL730C Technical Education

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.

Removing the Igniter Switches

1. Remove the control panel (see "Removing
the Control Panel section).
2. Remove the rubber protection covers from
all the gas valves.
3. Remove (unsnap) the igniter switches from all
gas valves.
4. On the right side of the burner box, locate and
disconnect the spark igniter's quick disconnect
connection.
5. Remove the igniter switch assembly (all
switches are serviced as one piece). Figure 10
n
3-4 Vesta Gas and Electric Slide-In Ranges
Figure 10

Removing a cooktop burner

1. Remove the cooktop (see "Removing the Cooktop"
section).
2. Use a ½" open end wrench and remove the gas line from
the burner.
3. Remove the spark igniter from the burner by squeezing
and removing the igniter clip.
4. Remove the mounting screw and remove the burner
Figure 11

Removing a spark igniter

1. Remove the cooktop (see "Removing the Cooktop"
section).
2. Remove the spark igniter from the burner by squeezing
and removing the igniter clip.
Figure 12