Whirlpool IKEA IEL730C Technical Education page 46

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
Removing the Cooling Fan and Hall
Sensor assembly
Cooling Fan and Hall Sensor Assembly
( e Side Panel e o ed)
n
3-14 Vesta Gas and Electric Slide-In Ranges
1. Remove the control panel (see "Removing the Control
2. Remove the cooktop (see "Removing the Cooktop"
3. Remove 2 burner box screws securing the burner box to
Figure 44
4. Remove 1 fan motor mounting screw and slide the fan
. Lift the motor out of the slots and remove from the range.
Panel section).
section).
the side panel.
Cooling an Motor location ro
assembly to disengage from the 2 mounting slots.
Figure 45
ront o range
Figure 46