Removing A Sealed Burner & A Venturi - Whirlpool SF3000SE W Service Manual

Freestanding standard gas range
Hide thumbs Also See for SF3000SE W:
Table of Contents

Advertisement

REMOVING A SEALED BURNER & A VENTURI
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electrical
shock.
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
REMOVING A BURNER
1.
Turn off the gas to the range and disconnect
the power cord from the wall outlet.
2.
Remove the grates and burner caps from the
maintop.
3.
Remove the screws from the defective burner.
SCREW
BURNER
4.
Lift the defective burner off the venturi and
replace it with a new one, then reassemble
the range.
REMOVING A VENTURI
1.
2.
3.
4.
5.
MAINTOP
BURNER
BURNER
IGNITOR
VENTURI
MAINTOP
3-5
Cooking Products Service Manual
Original July, 1996
© 1996 Whirlpool Corporation
Turn off the gas to the range and disconnect
the power cord from the wall outlet.
Lift the maintop and prop it up (use the proce-
dure on page 3-2).
Lift the defective venturi from the burner box
and replace it with a new one.
Lift the top of the coil around both venturi
openings so they are even with the top.
Reassemble the range.
BURNER
BOX
4321890
Page 3-5
SLIDE COIL UP
TO TOP OF VENTURI
INSERT TAB
INTO SLOT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents