Emerson Rosemount 648 Reference Manual page 46

Commissioning
May 2020
4.3.2 Field Communicator
For HART Wireless transmitter communication via a Field Communicator, a Rosemount
648 Wireless Device Dashboard (DD) is required. Rosemount 648 Wireless Transmitter
equipped with Rosemount X-well Technology requires DD revision 648 Dev. 4 Rev. 1 or
higher to view Rosemount X-well functionality. To obtain the latest DD, visit the
Emerson.com/Field-Communicator.
The communication status may be verified in the wireless device using the following Fast
Key sequence.
Function
Communication
4.3.3 Wireless Gateway
If the Rosemount 648 Wireless was configured with the Network ID and Join Key and
sufficient time for network polling has passed, the transmitter will be connected to the
network. To verify device operation and connectivity using the Wireless Gateway's web
based user interface, navigate to the Devices page. This page will also display the
transmitter's tag, PV, SV, TV, QV, and Last Update time. Refer to Emerson Wireless
Gateway
Gateway web based user interface.
Note
The time to join the new device(s) to the network is dependent upon the number of
devices being joined and the number of devices in the current network. For one device
joining an existing network with multiple devices, it may take up to five minutes. It may
take up to 60 minutes for multiple new devices to join the existing network.
Figure 4-3: Wireless Gateway Devices Page
46
Fast Key sequence
3, 4
Manual Supplement for terms, user fields, and parameters used in the Wireless
Menu items
Comm, Join Mode, Neighbor Count, Advertisement
Count, Join Attempts
Reference Manual
00809-0200-4648
Rosemount 648 Wireless