Emerson Rosemount 648 Reference Manual page 16

Configuration
May 2020
2.4.2 AMS Device Manager and AMS Wireless Configurator
When configuring the Rosemount 648 Wireless using AMS Device Manager or AMS
Wireless Configurator, double click the Rosemount 648 Wireless device icon (or right click
and select Configure/Setup), then select the Configure/Setup tab. AMS Device Manager
configuration changes are implemented when the Apply button is selected.
Note
For HART Wireless transmitter communication via AMS Device Manager, a Rosemount
648 Wireless Device Dashboard (DD) is required. Rosemount 648 Wireless Transmitters
equipped with Rosemount X-well Technology requires DD revision 648 Dev. 4 Rev. 1 or
higher to view Rosemount X-well functionality. To obtain the latest DD, visit the
Easy Upgrade
2.4.3 Wireless Gateway
The Rosemount 648 Wireless supports limited remote configuration through the Wireless
Gateway. The Gateway allows configuration of the following device parameters: HART
Tag, Short Tag, Descriptor, Engineering Units, Update Rate and Range Values.
2.4.4 Default settings
The Rosemount 648 Wireless default configuration is shown below:
Sensor type
Engineering units
Number of lead wires
Network ID
Join Key
Update rate
Note
The C1 option code can be used to enable factory configuration of the Update Rate, Date,
Descriptor and Message fields. This code is not required to have the factory configure the
Sensor Type, Connection or the Self Organizing Network parameters.
2.4.5 Device sensor configuration
Every temperature sensor has unique characteristics. In order to ensure the most accurate
measurement, the device should be configured to match the specific sensor that it will be
connected to. Prior to installation, verify the configuration and connection settings of the
temperature sensor through a Field Communicator or AMS Device Manager.
16
site.
Pt 100 (α = 0.00386)
°C
4
Factory-generated network parameters
Factory-generated network parameters
1 minute
Rosemount 648 Wireless
Reference Manual
00809-0200-4648
Emerson