Legal Information - Otto Bock 10A11 Instructions For Use Manual

4 Handling
4.1 Assembly
The Cable Control Hooks for Adults are to be mounted to an Ottobock
wrist unit.
To make the replacement of the finger covers easier, warm up the finger
covers in lukewarm water 40 °C (104 °F) beforehand. If necessary, remove
the riser from the finger covers (Fig. 4). Maybe, the finger covers have to
be shortened.
Use 21A13=3 Connection Piece for adaption of the 10A11=*, 10A60=* Cable
Control Hook and 10A12=* All-purpose Hook to the 21A35=* / 21A36=*
Body Harness. The 21A19=* / 21A20=* Body Harness is to be connected
to the cable control hooks with the 21A13=1 / 21A13=2 Connection Piece.
Use 21A44 Connection Piece for adaption of the 10A18=* Cable Control
Hook to the 21A35=* / 21A36=* Body Harness. The 21A14 Connection
Piece is necessary when using the 21A19=* / 21A20=* Body Harness.

5 Legal information

All legal conditions are subject to the respective national laws of the coun-
try of use and may vary accordingly.
5.1 Liability
The manufacturer will only assume liability if the product is used in accor-
dance with the descriptions and instructions provided in this document.
The manufacturer will not assume liability for damage caused by disregard
of this document, particularly due to improper use or unauthorised modi-
fication of the product.
5.2 CE conformity
Medizinprodukt der Klasse 1 nach Anhang 7, 93/42/EWG
This product meets the requirements of the European Directive 93 / 42 / EEC
for medical devices. This product has been classified as a class I device
according to the classification criteria outlined in Annex IX of the directive.
The declaration of conformity was therefore created by the manufacturer
with sole responsibility according to Annex VII of the directive.
18 | Ottobock