Selecting Stations; Storing Dab+ Stations On A Memory Slot; Retrieving Dab+ Stations From A Memory Slot - TechniSat DIGITRADIO 1990 Instruction Manual

Portable dab+/fm radio with cd player and bluetooth music streaming
Table of Contents

Advertisement

>
Open the main menu by holding down the INFO/MENU/MEMORY button (5)
and use the TUNING/SKIP buttons (6, 7) to select the <Manual Setting> item.
Press the ENTER/STOP/SLEEP button (8).
>
Use the TUNING/SKIP buttons (6, 7) to select a channel (5A to 13F) and then
press the ENTER/STOP/SLEEP button (8). The signal intensity will now be
shown in the display. If a DAB+ station is being received on a channel, the
station ensemble name is displayed. The antenna can now be aligned to the
maximum signal intensity.
Stations with a signal intensity below the required minimum signal intensity
are not transmitting a strong enough signal. Readjust the antenna position if
required.
If there are stations on the set frequency or channel that have not yet been
stored in the station list, they will now also be saved.

9.4 Selecting stations

>
By pressing the TUNING/SKIP buttons (6, 7), the station list can be accessed
and you can switch between the available stations. Press the ENTER/STOP/
SLEEP button (8) to play the station.

9.5 Storing DAB+ stations on a memory slot

The programme memory can save up to 30 stations in the DAB+ range.
>
Now select the desired station.
>
In order to store this station on a memory slot, hold down the 3+ (18) button
during playback until [Save P3] appears in the display. Then use the TUNING/
SKIP buttons (6, 7) to select a favourites memory slot (1-30). Press the ENTER/
STOP/SLEEP button (8) to save.
>
Repeat this process to save additional stations.
You can also save stations to one of the One-Touch buttons (1 or 2 - 15, 16)
by holding down the corresponding button for a bit longer.

9.6 Retrieving DAB+ stations from a memory slot

>
To retrieve a station that you have already stored in the favourites memory,
briefly press the 3+ (18) button and select a station slot (1 - 30) using the
TUNING/SKIP buttons (6,7). Press the ENTER/STOP/SLEEP button (8) to play
the station.
If no station is saved on the selected station slot, [(empty)] appears in the
display.
Alternatively One-Touch button 1 or 2 (15, 16) can also be used.
18

Advertisement

Table of Contents
loading

Table of Contents