Table of Contents
Advertisement
Symptom
The sound is weak or of
poor quality.
17.2 Problems with the device
Symptom
The device cannot be switched on.
No sound can be heard.
Distorted sound can be heard.
Other operational malfunctions, loud
noises or a malfunctioning display
are occurring.
CD or MP3 CD is not detected or music
skips when played.
Malfunction with reception via a
Bluetooth connection
The display does not switch on.
30
Possible cause/remedy
Other devices such as televisions are
disrupting reception. Move the unit
further away from these devices.
The antenna is not extended or
correctly orientated. Extend the
antenna. Rotate the antenna to improve
reception.
Possible cause/remedy
Connect the mains lead to the
radio.
Insert new batteries.
Increase the volume. Remove the
headphone jack from the device
if you want to listen via the
speakers. Possibly the wrong source has
been selected.
In the vicinity of the device, a
mobile phone or other device
is emitting disruptive radio waves.
Remove the mobile phone or device
from the vicinity of the radio.
Electronic components in the device
are malfunctioning. Remove the
mains plug. Keep the device separated
from the power source for approx. 10
sec.
Reconnect the device.
Carefully clean the underneath of the
CD.
Use another CD.
The two devices must only be a
maximum of 8 metres away from each
other. Limit the distance.
Switch the device off. Remove the mains
plug, reinsert it and switch the device
on.
Check the display brightness setting.
Advertisement
Table of Contents
