Table of Contents
Advertisement
When the device is not being used, remove the plug from the socket. Pull the
plug and not on the cable. Remove the plug before a storm starts. Remove
the plug if the device is not going to be used for a prolonged period, e.g.
before going away on a long trip. The heat generated during operation must
be dissipated by means of sufficient air circulation. Therefore the device must
not be covered or installed in a closed cupboard. Ensure there is a free space
of at least 10 cm around the device.
7.3 Battery mode
>
The battery compartment is located on the underside of the DIGITRADIO 1990.
>
Slide the battery compartment cover (23) in the direction of the arrow and
remove it.
>
6 R14/C batteries are required for battery operation. Insert them with the
polarity as indicated in the battery compartment.
Incorrectly inserted batteries can lead to device defects. Always check that the
polarity is correct. Promptly replace batteries that are losing power.
Batteries can contain poisonous substances which harm the environment.
Batteries are subject to European Directive 2006/66/EC. They must not be
disposed of with normal domestic waste.
Several functions will not work in battery mode, or will work differently than in
mains mode. Refer to the relevant section for more details.
8 Basic operation
8.1 Switching the radio on/off
To turn on your DIGITRADIO 1990, press the
button again to switch it off.
To turn the DIGITRADIO 1990 on in battery mode, you will need to press and
hold the
After switching on for the first time, a station scan of all DAB+ channels is
automatically launched.
8.2 Menu navigation
To carry out advanced settings, or to change existing ones, you will generally need to
do so via the menu.
To navigate through the menu, use the function buttons on the device.
Please note that not all options are available in all modes. The main menu can only
be accessed in DAB+ or FM mode.
On/Standby button.
On / Standby button (2). Press the
15
Advertisement
Table of Contents
