Table of Contents
Advertisement
-
The CD player uses an invisible laser beam. If used incorrectly, this can injure
your eyes. Never look directly into the open CD compartment.
•
This devices has been classified as a CLASS 1 LASER.
3.4 Setting up the device
-
Place the device on a firm, secure and horizontal base. Make sure the area is
well ventilated.
-
Do not place the radio on soft surfaces such as carpets and blankets, or near
to curtains and wall hangings.
These could obstruct the ventilation openings. The necessary flow of air could
be interrupted as a result. This could potentially lead to fire in the device.
-
Do not cover the radio with curtains, blankets or newspapers.
-
Do not place the device near to sources of heat, such as radiators. Avoid direct
sunlight and very dusty environments.
-
Do not select a location for the device with a high air humidity, e.g. a kitchen
or sauna, as the precipitation of condensation water could damage the device.
The device is intended for use in a dry environment and in a moderate climate
and must not be exposed to dripping or splashing water.
-
You may only operate the device in a horizontal position.
-
Do not place any heavy objects on the device.
-
If you move the device from a cold environment to a hot environment,
moisture could accumulate inside the device. In this case, wait for around an
hour before using the radio.
-
Route the mains cable in such a way that nobody can trip over it.
-
The power outlet should be as close to the device as possible.
-
To ensure a connection to the mains, insert the plug fully into the socket.
-
Use a suitable, easy-to-access mains connection and avoid using multiple
socket strips.
-
Do not handle the mains adapter or power cord with wet hands, as there is a
risk of electric shock!
-
In the case of malfunctions or detecting smoke or odour from the housing,
remove the plug from the power outlet immediately.
10
Advertisement
Table of Contents
