Performing The Station Scan; Selecting Stations - TechniSat DIGITRADIO 216 Instruction Manual

7.2.1 Performing the station scan

The automatic scan (Full Scan) scans all DAB Band III stations and thereby finds all stations being
broadcast within the reception range.
After the scan is complete, the first station is played back in alphanumeric order.
> In order to perform a complete scan, open the menu by holding down the MENU button and use
the <, > and SELECT buttons to select the [Auto Scan] menu item.
> [Scanning...] appears on the display.
During the scan, a progress bar and the number of stations found is displayed.
If no stations are found, check the antenna and change the installation location if necessary (Point
5.3.2).

7.2.2 Selecting stations

> To select a DAB station, press the < or > buttons and confirm the station selection with SELECT.
> Alternatively, you can also hold the MENU button down for longer, open the station list in the menu
via SELECT and use < or > to select a station.
> Then press SELECT to listen to a station.
EN
FR
NL
IT
DE
29