Standard Warning Statements - Cisco 4000 Series Hardware Installation Manual

Cisco 4000 Series ISRs Preinstallation
This chapter provides preinstallation information, such as recommendations and requirements that must
be met before installing your router. Before you begin, inspect all items for shipping damage. If anything
appears to be damaged or if you encounter problems installing or configuring your router, contact
customer service. Warranty, service, and support information is included in the Hardware Quick Start
guide that is shipped with your router. See the following sections to prepare for installation:
•
•
•
•
•
•
•
To see translated warnings that appear in this publications, see the
Information for the Cisco 4000 Series Routers

Standard Warning Statements

This section describes the warning definition and then lists core safety warnings grouped by topic.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Note: SAVE THESE INSTRUCTIONS
Statement 1071
OL-32185-02
Safety Recommendations, page 2-5
General Site Requirements, page 2-7
Rack Requirements, page 2-9
Router Environmental Requirements, page 2-9
Network Cabling Specifications, page 2-10
Installation Checklist, page 2-15
Creating a Site Log, page 2-16
Hardware Installation Guide for the Cisco 4000 Series Integrated Services Router
C H A P T E R
Regulatory Compliance and Safety
document
2f
2-1