Cisco 4000 Series Hardware Installation Manual page 195

Chapter 5 Install and Upgrade Internal Modules and FRUs
Figure 5-54
1
Supplied screw
3 Flash memory card
5 Flash memory card connector
Step 4 Tighten the supplied screw (see
Step 5 Replace the chassis cover. See
OL-32185-02
Memory Cards
Figure 5-54) to secure the flash memory card in place.
"Remove and Replace Chassis Cover" section on page
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
Remove and Install the Flash Memory Card
1
1
2
3
4
5
6
2
Supplied screw
4 SSD mSATA storage device
6 SSD mSATA connector
5-4.
5-71