Safety Warnings; Standard Warning Statements - Cisco NCS 540 Hardware Installation Manual

Safety Warnings

This handout topic lists the safety warnings necessary for handling this product. Before you install or service
the chassis, review these safety warnings to avoid injuring yourself or damaging the equipment.
For a complete list of translated safety warnings, see the
Cisco NCS 500 Series Routers
The safety warnings are grouped under the following sections:
•
•
•
•
•
•

Standard Warning Statements

Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
by using a special tool, lock and key, or other means of security. Statement 1017
Warning
Ultimate disposal of this product must be handled according to all national laws and regulations. Statement
1040
Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended
ambient temperature of 158°F (70°C). Statement 1047
Warning Mount the device on a rack that is permanently affixed to the building. Statement 1049
document.
Standard Warning Statements, on page 1
Safety Guidelines for Personal Safety and Equipment Protection, on page 2
Safety Precautions for Module Installation and Removal, on page 2
Safety with Electricity, on page 3
Power Supply Considerations, on page 5
Preventing ESD Damage, on page 6
1
C H A P T E R
Regulatory Compliance and Safety Information —
Cisco NCS 540 Router Hardware Installation Guide
1