Connect Power - Cisco 4000 Series Hardware Installation Manual

Connect Power

Figure 3-13
Step 4 Connect the other end of the ground wire to a known reliable earth ground point at your site.
Connect Power
This section explains how to connect AC power to the router.
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
Warning This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Note The installation must comply with all required electrical codes applicable at the installation site.
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
3-20
Chassis Ground Connection on the Router (Cisco 4451-X ISR shown) Chassis
Chapter 3 Install and Connect Cisco 4000 Series ISRs
OL-32185-02