Cisco 4000 Series Isrs Preinstallation; Standard Warning Statements; General Safety Warnings - Cisco 4451 ISR Hardware Installation Manual

4000 series integrated services routers
Table of Contents

Advertisement

Standard Warning Statements

General Safety Warnings

Read the installation instructions before you connect the system to its power source. Statement
Warning
1004
Warning
Ultimate disposal of this product should be handled according to all national laws and
regulations. Statement 1040
Warning
Installation of the equipment must comply with local and national electrical codes. Statement
1074
To comply with the Class A emissions requirements shielded twisted pair T1/E1 cables must be
Warning
used for SPA-8-Port Channelized T1/E1 SPA (SPA-8XCHT1/E1) on the router.
EN55022/CISPR22 Statement
To comply with Class A emissions requirements- shielded management Ethernet, CON, and AUX
Warning
cables on the router must be used.
Power cable and AC adapter - When installing the product, please use the provided or designated
Warning
connection cables/power cables/AC adaptors. Using any other cables or adapters could cause a
malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of certified
cables (that have the 'UL' shown on the code) for any other electrical devices than products
designated by Cisco. The use of cables that are certified by Electrical Appliance and Material
Safety Law (that have 'PSE' shown on the code) is not limited to Cisco-designated products.
Statement 371
Only trained and qualified personnel should be allowed to install or replace this equipment
Warning
Statement 1030
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection.
Ensure that the protective device is rated not greater than: AC power supplies for the Cisco
4451-X ISR. Statement 1005
Warning
This product requires short-circuit (overcurrent) protection to be provided as part of the
building installation. Install only in accordance with national and local wiring regulations.
Statement 1045
Hardware Installation Guide for the Cisco 4000 Series Integrated Services Router
2-2
Chapter 2

Cisco 4000 Series ISRs Preinstallation

OL-32185-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4351 isr4331 isr4221 isr4431 isr4321 isr

Table of Contents