Overview Of Nim-Hdd Card - Cisco 4000 Series Hardware Installation Manual

Overview of NIM-HDD Card

Figure 5-15
To insert or remove the NIM-SSD into any router NIM slot, see
Cisco NIM-SSD or NIM-HDD"
Overview of NIM-HDD Card
The NIM-HDD is a network interface module that is used to support hard disk drive (HDD) connection
for Cisco 4400 Series ISR and Cisco 4300 ISR.
The NIM-HDD module has the following features:
•
•
•
•
•
•
A drive is removable or insertable while the power is running on the SSD/HDD connector.
Note
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
5-20
Side View of the NIM-SSD
Provides 1 TB of memory.
The NIM form-factor supports and houses a single field replaceable 15 mm HDD or two SSDs.
On-board PCIe dual channel SATA controller enables the NIM-HDD in any NIM slot of the router
(Controller Mode)
Support SATA pass-through mode
Supports module level OIR operation
Supports hot plug of SSD/HDDs
Chapter 5
section in this chapter.
Install and Upgrade Internal Modules and FRUs
the"Remove and Replace
OL-32185-02