Chapter 5
Install and Upgrade Internal Modules and FRUs
Figure 5-23
Insert the DIMM into the connector one side at a time.
Step 6
a DIMM.
Figure 5-24
Firmly press the DIMM into the connector until the latches close onto the DIMM. Ensure that both
Step 7
latches rotate to the closed position against the DIMM. See
OL-32185-02
DIMM Showing Polarization Notch
Handle the DIMMs
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
Install and Remove DDR DIMMs on Cisco 4400 or 4300 Series ISRs
1
Figure 5-24
shows what to avoid while handling
Figure
5-25.
5-29