Temperature Screening - HIKVISION DS-9600NI-I8 Series User Manual

Network Video Recorder User Manual
Figure 6-4 Facial Detection
3. Select a camera to configure.
4. Check Enable Face Detection.
5. Optional: Check Save VCA Picture to save the captured pictures of face detection.
6. Set the detection sensitivity. Sensitivity range: [1-5]. The higher the value is, the more easily the
face will be detected.
7. Set the arming schedule. Refer to Configure Arming Schedule
8. Set linkage actions. Refer to Configure Linkage Actions
9. Click Apply.

6.2.2 Temperature Screening

After connecting with specified thermography cameras, the device can display temperature
measurement results, and notify you with audio alert when normal or abnormal temperature is
detected.
Before You Start
Ensure your thermography camera support this function, and it is properly configured.
Steps
1. Go to System → Event → Smart Event .
2. Select the optical channel of thermography camera.
3. Click Face Capture.
4. Optional: Check Save VCA Picture to save the captured pictures of face detection.
5. Set the arming schedule. Refer to Configure Arming Schedule .
55