Add Network Camera Through Poe - HIKVISION DS-9600NI-I8 Series User Manual

4. Optional: Check Use Channel Default Password to use the default password to add the camera.
5. Optional: Check Use Default Port to use the default management port to add the camera. For
SDK service, the default port value is 8000. For enhanced SDK service, the default value is 8443.
Note
The function is only available when you use HIKVISION protocol.
6. Optional: Check Verify Certificate to verify the camera with certificate. The certificate is a form
of identification for the camera that provides more secure camera authentication. It requires to
import the network camera certificate to the device first when you use this function. For details,
refer to .
Note
The function is only available when you use HIKVISION protocol.
7. Click Add.
8. Optional: Check Continue to Add to add other network cameras.

1.4.3 Add Network Camera Through PoE

The PoE interfaces enable the device system to pass electrical power safely, along with data, on
Ethernet cabling to the connected PoE cameras. Supported PoE camera number varies with device
module. If you disable the PoE interface, you can also connect to the online network cameras. And
the PoE interface supports the Plug-and-Play function.
Network Video Recorder User Manual
Figure 1-11 Add Network Camera
10