Configure Customized Protocol - HIKVISION DS-9600NI-I8 Series User Manual

Add Non-PoE Network Camera
You can disable the PoE interface by selecting the manual while the current channel can be used as
a normal channel and the parameters can also be edited.
Steps
1. Go to Camera → Camera → IP Camera .
2. Position the cursor on a window with no linked network camera and click
3. Select Adding Method as Manual.
Plug-and-Play
The camera is physically connected to the PoE interface. Its parameters cannot be edited.
You can go to System → Network → TCP/IP to change IP address of PoE port.
Manual
Add IP camera without physical connection via network.
4. Enter IP address, User Name, and Password.
5. Click OK.

1.4.4 Configure Customized Protocol

To connect network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them. The system provides 16 customized protocols.
Steps
1. Go to More Settings → Protocol .
Network Video Recorder User Manual
Figure 1-13 Edit Network Camera
12
.