Pir Alarm - HIKVISION DS-9600NI-I8 Series User Manual

3. Select a camera to configure.
4. Check Enable.
5. Optional: Check Save VCA Picture to save the captured sudden scene change detection
pictures.
6. Drag the Sensitivity slider to set the detection sensitivity.
Note
Sensitivity range: [1-100]. The higher the value, the more easily the change of scene can trigger
the alarm.
7. Set the arming schedule.Refer to Configure Arming Schedule .
8. Set the linkage actions. Refer to Configure Linkage Actions .
9. Click Apply.

6.2.17 PIR Alarm

A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector vision field.
The heat energy dissipated by a person or any other warm blooded creature such as dogs, cats,
etc., can be detected.
Steps
1. Go to System → Event → Smart Event .
2. Click PIR Alarm.
Network Video Recorder User Manual
Figure 6-19 Sudden Scene Change
70