HIKVISION DS-9600NI-I8 Series User Manual page 150

3. Select the firmware update file from the storage device.
4. Click Upgrade to start upgrading.
After the upgrade is completed, the device will reboot automatically to activate the new
firmware.
Upgrade by FTP
Before You Start
Ensure the network connection of the PC (running FTP server) and the device are valid and correct.
Run the FTP server on the PC and copy the firmware into the corresponding directory of your PC.
Steps
1. Go to Maintenance → Upgrade .
2. Click FTP to enter the local upgrade interface.
3. Enter FTP Server Address.
4. Click Upgrade to start upgrading.
5. After the upgrading is complete, reboot the device to activate the new firmware.
Upgrade by Guarding Vision
After logging the device into Guarding Vision, the device would periodically check for the latest
firmware from Guarding Vision. If an upgrade firmware is available, the device will notify you when
you log in. You can also manually check for the latest firmware.
Network Video Recorder User Manual
Figure 15-10 Local Upgrade Interface
Figure 15-11 FTP Upgrade Interface
133