Chapter 4: Management, Security, Alarms And Troubleshooting; Management Applications; Avaya G450 Command Line Interface (Cli); Avaya G450 Manager And Embedded Web Manager - Avaya G450 Manual

Chapter 4: Management, Security, Alarms

Management applications

The Avaya G450 Media Gateway can be managed using any of the following applications:
Avaya G450 Command Line Interfaces
●

Avaya G450 Manager and Embedded Web Manager

●
Avaya Integrated Management
●

Avaya G450 Command Line Interface (CLI)

You can use the Avaya G450 CLI to configure the G450 and its media modules. The CLI is a
textual command prompt interface. It is similar to the CLI of many other network devices.
You can access the CLI with any of the following:
Telnet through the network
●
Telnet through dialup, using a dialup PPP network connection
●
A console device connected to the Console port or Services port on the G450 front panel
●
SSH (Secure Shell), which enables you to establish a remote session over a secured
●
tunnel
For information about each command in the CLI, see the Avaya G450 CLI Reference,
03-602056.
For information about how to use the CLI to perform specific configuration tasks, see
Administration for the Avaya G450 Media Gateway, 03-602055.
Avaya G450 Manager and Embedded Web Manager
Avaya G450 Manager is a web-enabled graphical administration tool for configuring a single
G450 device. You can use Avaya G450 Manager to configure the G450 chassis and media
modules. You can also use it for status monitoring and troubleshooting. You can open Avaya
G450 Manager in one of the following ways:
From Avaya Integrated Management software
●
and Troubleshooting
Issue 1 January 2008 37