G450 Branch Gateway Physical Description - Avaya G450 Overview And Specification

Feature type

G450 Branch Gateway physical description

G450 Branch Gateway has four hardware versions, G450 1.x, G450 2.x, G450 3.x, and G450 4.x.
The G450 Branch Gateway hardware suffix printed on the label on the rear of the chassis (1.x,
2.x, 3.x, or 4.x) corresponds to versions 1, 2, 3, and 4 respectively.
No Name
1 System LEDs
2 USB
3 CONSOLE
4 SERVICES
5 CARD IN USE
6 ETR
7 CCA
8 ETH WAN
April 2020
Supported features
• SNMPv1 traps and SNMPv3 notifications
• Telnet (IPv4 only) and SSHv2 support
• SCP, TFTP, and FTP clients
• Syslog client
• Modem access for remote administration
• Packet Sniffing
• RTP-MIB
• Backup and Restore on USB Flash drive
Figure 1: Branch Gateway G450 1.x Chassis
Description
LEDs that indicate status of the system.
USB ports for the system.
RS-232 port for services and maintenance access. RJ-45 connector.
Ethernet 10/100 port for services and maintenance access. RJ-45
connector.
Compact flash slot.
Emergency Transfer Relay port that controls two external 808A
emergency transfer panels. RJ-45 connector.
RJ-45 port for ACS (308) contact closure adjunct box.
Two 10/100 Base TX Ethernet WAN ports. RJ-45 connectors.
Avaya G450 Branch Gateway Overview and Specification
Comments on this document? infodev@avaya.com
G450 Branch Gateway physical description
Table continues...
17