Chapter 4: Management, Security, Alarms And Troubleshooting; Management Applications; Avaya G250 And Avaya G350 Command Line Interfaces (Cli) - Avaya Media Gateways G250 Overview

Chapter 4: Management, Security, Alarms

Management applications

The Avaya G250 and Avaya G350 Media Gateways can be managed using any of the following
applications:
Avaya G250 and Avaya G350 Command Line Interfaces
●
Avaya G250/G350 Manager and Embedded Web Manager
●
Avaya Integrated Management
●
Avaya QoS Manager
●

Avaya G250 and Avaya G350 Command Line Interfaces (CLI)

You can use the Avaya G250 or G350 CLI to configure the G250/G350 and its media modules.
The CLI is a textual command prompt interface. It is similar to the CLI of many other network
devices.
You can access the CLI with any of the following:
Telnet through the network
●
Telnet through dialup, using a dialup PPP network connection
●
A console device connected to the Console port or on the G250/G350 front panel
●
SSH (Secure Shell), which enables you to establish a remote session over a secured
●
tunnel
For information about each command in the CLI, see the Avaya G250 and Avaya G350 Media
Gateway CLI Reference, 03-300437.
For information about how to use the CLI to perform specific configuration tasks, see
Administration for the Avaya G250 and Avaya G350 Media Gateways, 03-300436.
and Troubleshooting
Issue 5 June 2008 53