Advertisement
SERVICE MANUAL
Angle adjustment:
Remove the two bolts and nuts A that fix the footrest plate to the clamp B.
Loosen the two bolts and nuts C that fix the clamp B to the two tubes.
Turn the clamp until the necessary inclination.
Lay the footrest plate on the clamp to check the inclination.
Firmly tighten the bolts and nuts C.
Finally. Fix the plates with the two bolts and nuts A.
A
Position adjustment:
4 positions: internal; 2/3 internal; 2/3 external; external
Remove the two bolts and nuts A and fix the plate using the other two holes on the same plate. You can also fix the plate facing front or
rear without the need (even though possible) of reversing the clamp.
If you wish to reverse the clamp, remove the bolts/washer/nuts fixing the footplate tubes to the frame (see "footplate distance") and remove
the footplate.
Reverse the assembly, fix the tube at the necessary height and adjust the angle as above mentioned.
To make inserting the tubes easier, if possible, remove the rubber adaptor from the frame and slide it along the footplate tube; that will cre-
ate more room for the passage of footplate tubes.
It will be necessary to adjust the inclination.
7 cm
INTERNA
REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV - www.rehateamprogeo.com
ALUMINIUM FOOTPLATE
WITH CURVED TUBES
A
2/3 INTERNA
C
C
A
A
B
2/3 ESTERNA
A
A
C
C
A
C
C
ESTERNA
A
Service Manual DUKE 22
A
A
Advertisement
