Advertisement
SERVICE MANUAL
B
Bolt V2 fixing
The bolt V2 fixes both the side guard and the backrest plate A.
To remove the bolt, hold it, screw the nut B off and pull the bolt off.
Pay attention to all washers that are present.
Now, to make operations easier and to better see the parts, in these pictures we removed both the backrest and the ring D of the lock string.
See also adjustment sheet "backrest positioning".
You can carry out these operations without removing those components.
To re-assemble the bolt V2, insert it through the hole of side guard.
Insert the spacer
C, let the bolt V2 go through the frame and insert the two steel washers.
Position the white nylon washer on the plate and insert the plate. Then, put another white nylon washer, a steel washer and tighten
the nut B while holding the bolt V2.
WARNING!
DO NOT tighten the bolt/nut too much; you may damage the carbon fibre tube. When you feel the nut starts to tighten, the
torque is enough to make the side guard rigid.
REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV - www.rehateamprogeo.com
SIDE GUARD
A
V2
B
C
A
V2
A
X 2
D
Follows next page
Service Manual DUKE 15
Advertisement
