Advertisement
SERVICE MANUAL
B
When you increase the rear height, you have to move the side guard down.
X
If the lower side of the side guard is in contact with the support, it is necessary to cut it.
Measure the distance X from side guard and tyre and subtract 5 mm (es: 18-5 = 13 mm to cut).
Remove the three bolts H to take the side guard off the blade.
Draw the cut line according to the result you got.
Saw the side guard along the drawn line and round off the edges with a scissors blade or thin sand paper.
Continue with instruction A.
C
When you change the setting, you have to move the side guard frontward or backward according to the new position of the rear
wheel, but the height of the side guard remains the same.
Proceed with instruction A.
D
When you change both the rear height and the setting, you have to move the side guard up or down and forward or backward.
Continue with instruction
A
At each adjustment, spread some mild
lock thread glue on the bolts C and H.
REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV - www.rehateamprogeo.com
SIDE GUARD
STANDARD REAR UNIT
and, if necessary, instruction B, too
B
Service Manual DUKE 19
Advertisement
