Load File To Buffer - Dataman 48UXP User Manual

This writes the bytes 3,7,11,15, ... into the output file.
4th byte of 4
This writes the bytes 4,8,12,16, ... into the output file.
From Buffer address
Buffer size

Load File to Buffer

Menu
Hot key
This option loads a file from disk into the memory buffer. The
type of files that can be loaded for a device depends on the
device type.
Select a file to load using the mouse, or type the filename in
the box provided. You can also type in a file spec. (e.g. *.hex)
at the name prompt. This will display all the files of the
specified type, and you can then select the required file to load.
This specify the start address of
the buffer you want to save the
file, default from 0000h, any
address (0h to Max. of the buffer
address can be edit)
The buffer size is depend on the chip you
select for example when select 29F010 (the
buffer size will be 1Mbit which is 20000h)
File / Load File
Alt-L