Table of Contents
Advertisement
File name
This specifies the file name and its destination
Auto Format Detected
The software automatically detects the format of the file that
is to be loaded. If the desired format of the file different
from the format detected, select the correct file format by
move the cursor to the selection position, click the right
bottom of the mouse, move it to desired file format and click
the right mouse bottom, available file format include: Binary,
HP64000ABS, Intel Hex, MOS Tech Hex, Motorola S
format, TEK Hex, and Straight Hex.
From File to buffer
This option indicates which bytes must be read in the input
file. Select the required choice, default with normal selection,
this load all the file into the buffer, also available in Even
(only even byte load into the buffer), Odd (load the odd byte
to the buffer), also available in 1
th
byte of 4, 4
byte of 4. Details of the selection, reference
"save buffer to file" section.
To Buffer
This option indicates where the byte previously read is to be
written. This enables you to 'build' the memory buffer from
several files, default section with normal (load all the file to
the buffer), Even means load the file to even byte of the
buffer, Odd means load the file into the odd byte of the
buffer, other selection include 1
th
of the 4 byte, and 4
From File Address
Only a selected range of file to be load input buffer, fill in
the address that will contain the first byte into this box, this
is the starting address of the file to be load.
st
byte of 4, 2
st
of 4 byte, 2
of the 4 byte.
nd
rd
byte of 4, 3
nd
rd
of 4 byte, 3
Advertisement
Table of Contents
