Table of Contents
Advertisement
buffer size is 80 (Hex), will therefore an end address of
3F.
When selecting a start or an end-address, you should align
the buffer on the right boundary: single-word for 8-bit
devices, double word for 16-bit devices, etc.
Buffer size
This is the memory buffer in the Dataman-48UXP
software, once the chip is select, the software open the
buffer to match the chip size, user can edit this buffer size
to enlarge it size to 256 M bit Max (4000000h) shuffler
the file.
Auto increment start/end address
This function allow customer to program memory chips
with different serial number on specific location without
go to edit the buffer one by one. Specify the serial number
location by editing auto increment start address and auto
increment end address, edit the initial contents with buffer
edit and set the increment value by edit the auto increment
value and select the increment format.
Auto increment value
This set each increment value after initial value.
Auto increment data format selection
Binary increment format example
0, 1, 10,11,100, 101,110,111, 1000,1001,1010,1011,1100
ASCII Hex format example
0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F,10,11,12, ...
Advertisement
Table of Contents
