Dataman 48UXP User Manual page 72

adapters.
The system is in demo mode!
The Dataman-48UXP was not found when the software was started
up, and went into "Demo mode". You can still run the program
(some of it) but you cannot execute any hardware functions. Your
Dataman-48UXP hardware may be failure and need to repair.
This function is not supported in demo mode!
The Dataman-48UXP was not found when the software was started
up, and went into "Demo mode". This function is not supported in
Demo Mode.
Time-out error!
The Dataman-48UXP has not responded to a request for a long time.
This error may also happen when perform erase a flash memory
chip, when the chip can not erase successfully within the time
period, this message will display, it means your chip can not erase
any more, change a new chip.
Unexpected code/data/end-of-file/run-time instruction reached!
The input file is corrupt or of the wrong format.
User break!
This message is displayed whenever you "cancel" an operation.
Wrong file format or file is corrupt!
An input file with the wrong format was selected. Selected the right
format for the input file.