4-3 File Load
4-3-1 Load File Path
The path to your programming data file (HEX, Binary...) that will be loaded into the buffer.
4-3-2 File Format
Select the format of the programming date file. If you are unsure about the format we
recommend using the "Auto Detect" function.
4-3-3 Source Select
Set the address range of the programming data file that will be loaded into the buffer.
※
the "Start Address" cannot be larger than the "End Address".
4-3-4 Destination Select
After loading the programming data file, the data will be placed in the buffer at the start
Dataman-S6 - User's Manual
Search Records
Automatically adjust to
the selected IC's capacity
Fill value for unused
regions
12
Browse