Auto Select Eprom - Dataman 48UXP User Manual

Keyboard
Press TAB until the cursor is flashing in the "Type" box.
Use the up and down arrows to go to the appropriate type.
Press the space bar to select the type.
2. Enter the part number, the manufacturer number, or parts of
both in the "Search" box.
Mouse
Click on "Search". Type in the character.
Keyboard
Press TAB until the cursor flashes in the "Search" box.
Type in the known characters. All the devices that satisfy
this partial information will be displayed. Use the mouse to
select a device, and click "OK". If you are not using a
mouse, use the TAB key to skip between the various
screens, and use the arrow keys to move around in each
screen.

Auto Select EPROM

Menu
Hot key
This function allow the user to detect which EPROM/Flash
chip has been inserted in the Dataman-48UXP ZIF socket, all
the EPROM or Flash memory chip has manufacture ID and
device ID in the chip (hardware ID), when perform this
function, the Dataman-48UXP applied a 12V high voltage to
the A9 location of the chip, then read out the chip's hardware
ID and compare to library then display the possible chip in the
screen.
This Auto ID only available for 32 pin or 28 pin EPOM and
Flash memory chip, it can not applied to MCU, PLD or other
serial PROM, EPROM/Flash chip with over 40 pin do not have
Device/ Auto Select EPROM
Alt-A