Table of Contents
Advertisement
Options
Modify Programming Parameters
Menu
Hot key
This function allows a user to modify the programming parameters
of the chip being programmed. With the programming parameters
for the selected chip appearing on screen, the user activates the
"modify algorithm screen" and changes the parameters by moving
the cursor to the corresponding field and changing the value to the
desired value. If a value entered exceeds the allowable limits for a
given parameter, a warning will be flashed, together with allowable
limits, after the user attempts to confirm the setting by pressing
"OK".
Warning: Only experienced users should use this option, as it
can damage the device if the voltage exceeds the Max tolerance
of the device.
As the programming parameters are for temporary use only,
they cannot be saved. After you select a new device or exit the
Dataman-48UXP software the original parameters will
automatically be restored.
Device Operation Options
Menu
Hot key
Options / parameters modify
F3
Options / Operation options
F4
Advertisement
Table of Contents
