Table of Contents
Advertisement
Operation
Main Level
Running Mode:
Sys Info
DMX Address:
Temperature:
Configuration (DMX)
The Intimidator Spot 160 works with a DMX controller. Information about DMX is in the CHAUVET DMX
Primer, which is available from the Chauvet website:
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If the starting address is set too high, access to some of the product's channels could be
restricted. The Intimidator Spot 160 uses up to 11 DMX channels, which defines the highest configurable
address to 502.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Address.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select the starting address, from 001–512.
5. Press <ENTER>.
DMX Personalities
The Intimidator Spot 160 has two DMX personalities: an 11-channel personality and a 5-channel
personality.
To select a DMX personality, follow the instructions below.
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select DMX.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select the DMX personality, from 11CH or 05CH.
7. Press <ENTER>.
Intimidator Spot 160 User Manual Rev. 2
Programming Levels
Ver:
_ _ _ _ _ _ _ Displays the current running mode
_ _ _
_ _ °C
Description
V_
Displays the current firmware version
Displays the current DMX address
Displays the product temperature in °C
Page 7 of 20
Advertisement
Table of Contents
