Table of Contents
Advertisement
Operation
Standalone Configuration
Set the product in one of the standalone modes to operate without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
Play Audio
To select an audio file to play on the DMX-RT4, follow the instructions below.
1. Press <MENU> repeatedly until Play Audio shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Audio.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select the desired audio file.
6. Press <ENTER>.
To set the frequency of play for the selected audio file:
1. Press <MENU> repeatedly until Play Audio shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Mode.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select One Loop (to play the audio file once) or Loop Play (to play the
audio file repeatedly).
6. Press <ENTER>.
To play, pause, or return to the previous menu:
1. Press <MENU> repeatedly until Play Audio shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Start Play (begins playing the selected file).
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select Stop Play (to pause the audio file) or Return (to return to the
previous menu).
6. Press <ENTER>.
Delete Audio
To delete an audio file:
1. Press <MENU> repeatedly until Delete Audio shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select an audio file to delete.
4. Press <ENTER>.
5. Select Delete Audio and press <ENTER>.
6. Use <UP> or <DOWN> to select Continue (to delete the audio file) or Return (to return to the
previous menu).
7. Press <ENTER>.
Play Show
To select a show:
1. Press <MENU> repeatedly until Play show shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Show.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select a show to play.
6. Press <ENTER>.
DMX-RT4 User Manual Rev. 1
12
Advertisement
Table of Contents
