Sheet Jams At The Deflector - Horizon Fitness PF-P330 Manual

5: Folding Quality Troubleshooting
5-6

Sheet Jams at the Deflector

Antistatic tape on the deflector comes
off.
The Third
Fold Roller
Antistatic Tape
3
5 3
4
Deflector
- The antistatic tape is attached on the deflector as
shown above.
When the deflector is raised (when the solenoid
Y02 is ON), the edge of the sheet that comes
through the second and third fold roller touches the
antistatic tape and is delivered.
- Check the attachment of the antistatic tape by
inserting hand from the delivery conveyor side and
touching the rear (infeed) side of the deflector.
Deflector mechanism malfunctions.
2 Fulcrum
3
Plunger
4
1
Y02/Y03
2
Check the followings:
The fixing screws on the deflector are fully
1
tightened.
The fulcrum screw on the deflector lever is
2
fully tightened.
The connecting screw on the deflector lever is
3
fully tightened.
The screw connecting the plunger of the
4
solenoid Y02/Y03 and the lever bracket is fully
tightened.
The fixing screws on the solenoid Y02/Y03 are
5
fully tightened.
- When pushing in the plunger of the Y02/Y03
manually, the deflector moves smoothly.
- When changing the fold patterns by pressing the
fold pattern selecting button, the Y02/Y03 moves
correctly.
5-6: Sheet Jams at the Deflector
5
Folding Quality Troubleshooting
The deflector is deformed.
The Third Fold Roller
Deflector
Deflector Holder
1
Deflector Lever (front)
Lever Bracket
5
- If the deflector is deformed and does not align with
the fold roller at the center, the sheet path is
blocked there and may cause wrinkles.
Remove the deflector and flatten it out. [Distortion:
within 0.1 mm (0.004") ]
- When removing the jammed sheet on the deflector,
if it is pulled by force, that may deform the deflector.
Instruct the operator how to remove the jammed
sheet.
At Center
Deflector
Correct Incorrect
5-7