Sheet Guides Right Angle And Parallel Adjustment - Horizon Fitness PF-P330 Manual

3: Adjusting and Checking Procedures
3-1

Sheet Guides Right Angle and Parallel Adjustment

PF-P330 has the mechanism that the sheet
guides F and R turn together to feed sheets
to the feed rotor at right angle. (Fig.1)
This section describes instructions to
correct the angle of the sheet guides F and
R in case their angle differs each other
(Fig.2)
Loosen the fulcrum screw on the sheet
guide. (Fig.2)
- Do not remove the screw completely, just loosen it
by the half of a rotation.
Loosen the adjusting screw.
- Do not remove the screw completely, just loosen it
by one rotation.
Adjust the sheet guide angle at right
angle and parallel. (Fig.3)
- Load a square sheet on the feed table.
- Place the sheet so that sheet edge touches the
front stop.
- Align the sheet guide F and R with the sheet and
tighten the screws described in step
Sheet Guide R
Sheet Guide F
Eccentric Rod
Fig. 1 Feed Angle Adjusting Mechanism
and .
Fig. 3 Right Angle and Parallel Adjustment
Guide Fulcrum
Front Stop
Sheet
The screw works as
the fulcrum of
sheet guide angle.
Angle is adjustable
within the range of
this square.
Sheet Guide
Fixing Knob
Sheet Guide
1 2
Fulcrum Adjusting
Screw Screw
Slide Bracket Nut Plate
Fig. 2 Sheet Guide Mechanism
3-2