Sheet Jams At The Tray Gate - Horizon Fitness PF-P3100 Manual

5 Folding Quality Troubleshooting

5 - 6 Sheet Jams at the Tray Gate

Does tray gate mechanism malfunction?
Y02/Y03 Y02/Y03
Plunger
Lever Bracket
Gate Holder
Gate Lever (front)
Fulcrum Shaft
Check the followings:
1.
The locking screws on the tray gate are not loosened.
2.
The locking screw on the tray gate lever is not loos-
ened.
3.
The connecting screw on the tray gate lever is not
loosened.
4.
The pin which is connecting the plunger of the Y02/
Y03 solenoid and the lever bracket is not removed.
5.
The locking screws on the Y02/Y03 solenoid are not
loosened.
- When pushing in the plunger of the Y02/Y03 by fin-
ger, the tray gate moves smoothly.
- When changing the fold patterns by pressing the fold
pattern selecting button, the Y02/Y03 moves cor-
rectly.
5
Is the tray gate deformed?
503013
5_6_1A
Tray Gate
Tray Gate
Tray Gate
503013
5_1_1D
- If the tray gate is deformed and does not align with
the folded roller at the center, the sheet path becomes
narrower at a certain point and the delivered sheet
hits the deformed tray gate and jams. Remove the
tray gate and correct the deformation. (Distortion:
within 0.1 mm [0.004"])
- If jammed sheet on the tray gate is removed forcibly,
the tray gate can be deformed. Instruct the operator
how to remove the jammed sheet.
Folding Quality
5 - 6 Sheet Jams at the Tray Gate
Troubleshooting
Third Fold Roller
At Center
Correct Incorrect
5-7