Belt Tension Adjustment - Horizon Fitness PF-P330 Manual

3: Adjusting and Checking Procedures
3-6

Belt Tension Adjustment

Drive Timing Belt Tension
The tension of the drive timing belt is adjusted
by the fixing position of the drive motor (M01.)
Too much belt tension may result in that the
timing belt vibrated by the motion of the
machine. Do not tense the belt too much.
When the belt is pushed by
200 g at its center, the belt
bends by 3-4 mm (0.12"-0.16".)
M01
3
Fold Roller Drive Timing Belt Tension
The tension of the fold roller drive timing belt
is adjusted by the fixing position of the tension
roller. The hole on the side plate to fix the
tension roller is slot.
Tension Roller
Feed Roller Drive
Timing Belt
Fold Roller Drive
Timing Belt
Power Timing Belt
3-6: Belt Tension Adjustment
Adjusting and Checking Procedures
Delivery Belt Tension
The delivery belts are flexible, therefore, the
belt tension is not adjustable. Fix the delivery
roller shaft at the center of the slot on the side
plate.
If the delivery belt slips, set the delivery roller
shaft at exit side of the slot.
The fold roller drive
timing belt bends by
about 1 mm (0.04")
Delivery Belt
Fix at the center
of the slot.
3-7